Related Cli Commands - Digi TransPort WR31 User Manual

Configure security settings
Advanced TACACS+ security settings
The parameters described in this section should not normally need to be adjusted.
Use source IP Address x,y
If required, due to the TACACS+ server being accessed via a VPN tunnel, an alternative source
interface and instance may be selected here. Select the required interface from the drop-down
list and enter the instance of that interface into the adjacent text box. The available interface
options are
Auto
•
PPP
•
Ethernet
•
Response Timeout s seconds
Text box
Stop the negotiation if there is no activity for s seconds
The amount of time (in seconds) before an inactive socket is closed.

Related CLI commands

Entity Instance
tacplus 0
tacplus 0
tacplus 0
tacplus 0
Digi TransPort WR Routers User Guide
Parameter Values
ip_ent Blank,ETH,PPP
Blank=Auto
ip_add 0-2147483647
respto 0-2147483647
Default=30
inact 0-2147483647
Default=30
Advanced TACACS+ security settings
Equivalent web parameter
Use source IP Address x,y
Use source IP Address x,y
Response Timeout s seconds
Stop the negotiation if there is no activity for s
seconds
725