Digi TransPort WR31 User Manual page 266

Configure network interfaces
Entity Instance
ppp n
ppp n
ppp n
ppp n
ppp n
ppp n
ppp n
ppp n
ppp n
ppp n
ppp n
ppp n
Digi TransPort WR Routers User Guide
Parameter Values
l_addr off, on
When on, allows
negotiation
When off, force
use of specified IP
address
DNSserver Valid IP address
a.b.c.d
secDNS Valid IP address
a.b.c.d
IPmin Valid IP address
a.b.c.d
IPrange 0-255
transDNS Valid IP address
a.b.c.d
sectransDNS Valid IP address
a.b.c.d
ans off, on
do_nat 0, 1, 2
0=Disabled
1=IP address
2=IP address and
port
natip Valid IP address
a.b.c.d
ipsec 0=Disabled
1=Enabled
2=Enabled and
Keep SAs
firewall off, on
Configure DialServ interfaces
Equivalent web parameter
Use a.b.c.d as the local IP address for this
router (not negotiable)
Primary DNS server
Secondary DNS server
Assign remote IP addresses from a.b.c.d to
a.b.c.d
Assign remote IP addresses from a.b.c.d to
a.b.c.d
Primary DNS server a.b.c.d
Secondary DNS server a.b.c.d
Allow this PPP interface to answer incoming
calls
Enable NAT on this interface
IP address/IP address and Port
NAT Source IP address a.b.c.d
Enable IPsec on this interface/
Keep Security Associations when this
DialServ interface is disconnected
Enable the firewall on this interface
266