Digi TransPort WR31 User Manual page 461

Configure Virtual Private Networking (VPN)
Enable Socket mode
When enabled, enables the use of a Digi proprietary mode whereby PPP packets are sent via the
PPTP control socket rather than in GRE packets.
Encrypt control data using SSL version n
When enabled, the router encrypts the control data using SSL. This is a Digi proprietary function
and is not part of standard PPTP. The drop-down list allows the SSL version to be selected. The
available options are:
Use default
•
TLSv1 only
•
SSLv2 only
•
Enable PPTP debug
When enabled, enables debug tracing.
Related CLI commands
Entity Instance Parameter
pptp 0-9 name
pptp 0-9 remhost
pptp 0-9 ll_ent
pptp 0-9 ll_add
pptp 0-9 listen
pptp 0-9 swap_io
pptp 0-9 usesock
pptp 0-9 sslver
pptp 0-9 debug
Digi TransPort WR Routers User Guide
Values
Up to 30 characters
Valid IP address a.b.c.d Remote Host a.b.c.d
Blank, PPP, ETH
Blank means Auto
0-4294967296
off, on
off, on
off, on
Blank,SSL,TLS1,SSL2
Blank is disabled
(default)
SSL means use default.
off, on
Equivalent web parameter
Description
Use Interface x,y
Use Interface x,y
Accept incoming PPTP connections
Enable Server mode
Enable Socket mode
Encrypt control data using SSL version n
Enable PPTP debug
PPTP parameters
461