Digi TransPort WR31 User Manual page 779

Manage networks and connections
Protocol
The protocol that created the route. This setting can be one of the following:
Setting
Local
Remote
Static
Static/RIP
RIP
IBGP
EBGP
OSPF
Idx
Used for static routes only. The index of the configured static route.
Interface
The interface over which the IP packet will be routed when using the route.
Status
The current status of the route. This setting can be one of the following:
Setting
UP
DOWN
OOS
Related CLI commands
Command Options
route print
route printsrc
Digi TransPort WR Routers User Guide
Description
The route is for a network connected directly to the router.
The route is for a remote network accessed via a PPP connection.
The route is a static route.
The route is a static route that has been updated by RIP.
The route is a RIP route.
The route is an interior BGP route.
The route is an exterior BGP route.
The route is an OSPF route.
Description
The route is up and is ready for use in routing.
The interface that the route uses is currently down. The interface can be
activated if the route is required.
The interface that the route uses is currently "Out of Service".
Action
Displays the IPv4 routing table.
Displays the IPv4 routing table with the src addr information.
View network interface status
774