Digi TransPort WR31 User Manual page 277

Configure network interfaces
Profiles
Each serial port can have two profiles which can be configured differently. Which profile is in force
when the router powers-up is selected here.
Use profile n at power-up
Select 0 from the drop-down selection box to choose profile 0 to be active when the router
powers-up. Select 1 from the selection box to make profile 1 the active profile.
Load Config from Profile n
Select 0 from the drop-down selection box and click the button to load profile 0.
Apply & Save Changes to Profile n
Select 0 from the drop-down selection box and click the button to apply configuration changes
and save profile 0 after making any changes.
Related CLI commands
Entity Instance
&Yn
&Zn
&Wn
Digi TransPort WR Routers User Guide
Parameter Values
Where n =0, 1
Where n =0, 1
Where n =0, 1
Configure serial interfaces
Equivalent web parameter
Use profile n at power-up
Load Config from Profile n
Apply & Save Changes to Profile n
277