Digi TransPort WR31 User Manual page 576

Configure legacy protocols
10 Line folding
Controls the automatic generation of a [CR],[LF] sequence after a certain line width has been
reached.
Option
0
1-255
11 Port speed
This is a read only parameter, set automatically by the PAD and accessed by the remote system.
Option
15
14
12
3
12 Flow control of PAD (by DTE)
Determines the flow control setting of the PAD by the DTE in the on-line data state.
Option
0
1
3
13 LF insertion (after CR)
Controls the automatic generation of a Line Feed by the PAD.
Option
0
1
2
4
The line feed values can be added together to select Line Feed insertion to any desired
combination.
Digi TransPort WR Routers User Guide
Description
No line folding
Width of line before the PAD generates [CR],[LF]
Description
19,200 bps
9,600 bps
2,400 bps
2,400 bps
Description
No flow control
XON/XOFF flow control
RTS/CTS flow control (not a standard X.3 parameter)
Description
No line feed insertion
Line Feeds inserted in data passed TO the DTE
Line Feeds inserted in data received FROM the DTE
Line Feeds inserted after CRs echoed to DTE
Configure X.25 parameters
576