Digi TransPort WR31 User Manual page 2

Revision history—90001019
Revision Date
K April, 2013
L February, 2015
M December, 2015
N January, 2016
P June, 2017
Trademarks and copyright
Digi, Digi International, and the Digi logo are trademarks or registered trademarks in the United States and other
countries worldwide. All other trademarks mentioned in this document are the property of their respective
owners.
© 2017 Digi International. All rights reserved.
Disclaimers
Information in this document is subject to change without notice and does not represent a commitment on the
part of Digi International. Digi provides this document "as is," without warranty of any kind, expressed or
implied, including, but not limited to, the implied warranties of fitness or merchantability for a particular
purpose. Digi may make improvements and/or changes in this manual or in the product(s) and/or the program(s)
described in this manual at any time.
Warranty
To view product warranties online, visit www.digi.com/howtobuy/terms.
Digi TransPort WR Routers User Guide
Description
Added several new commands including network status
commands, GOBI image load selection and MultiTX.
Added PPP CLI commands and fixed errors.
Added TransPort WR31 product information. Created Hardware
chapter to house all hardware content for models, including
content migrated from Installation Guides. Addressed several
technical issues. Reorganized content and deleted obsolete
product information.
Updated TransPort WR31 serial pinout diagram and links to it.
Updated links and information Dynamic DNS feature.
Updated book title to Digi TransPort WR Routers User Guide.
Added feature support for new TransPort WR44 R and WR44 RR
models. Replaced hardware specifications with links to
specifications on Digi website. Modified regulatory and
certification information as required by RED (Radio Equipment
Directive). Addressed several hardware certification issues,
applied editing and formatting changes. Added new
configuration parameters for support of Wi-Fi roaming when
the TransPort WR device is in client mode: wifinode x
roam_threshold <rssi> and wifinode x roam_timeout <secs>.
Updated screen captures throughout guide to show rebranded
web interface. Released the document in HTML form.
2