Digi TransPort WR31 User Manual page 241

Configure network interfaces
Entity Instance
ppp n
ppp n
ppp n
ppp n
ppp n
ppp n
ppp n
ppp n
ppp n
ppp n
ppp n
ppp n
ppp n
Digi TransPort WR Routers User Guide
Parameter Values
l_addr off, on
When on, allows
negotiation
When off, forces
use of specified IP
address
DNSserver Valid IP address
a.b.c.d
secDNS Valid IP address
a.b.c.d
IPmin Valid IP address
a.b.c.d
IPrange 0-255
transDNS Valid IP address
a.b.c.d
sectransDNS Valid IP address
a.b.c.d
ans off, on
cingnb up to 25 digits
do_nat 0, 1, 2
0=Disabled
1=IP address
2=IP address and
port
nat_ip Valid IP address
a.b.c.d
ipsec 0=Disabled
1=Enabled
2=Enabled and
Keep SAs
firewall off, on
Configure ISDN interfaces
Equivalent web parameter
Use a.b.c.d as the local IP address of this
router
Use the following DNS servers if not
negotiated
Primary DNS server a.b.c.d
Use the following DNS servers if not
negotiated
Secondary DNS server a.b.c.d
Assign remote IP addresses from a.b.c.d to
a.b.c.d
Assign remote IP addresses from a.b.c.d to
a.b.c.d
Primary DNS server a.b.c.d
Secondary DNS server a.b.c.d
Allow this PPP interface to answer incoming
calls
Only allow calling numbers ending with n
Enable NAT on this interface
IP address/IP address and Port
NAT Source IP address a.b.c.d
Enable IPsec on this interface/
Keep Security Associations when this ISDN
interface is disconnected
Enable the firewall on this interface
241