Digi TransPort WR31 User Manual page 639

Configure alarms
Attachment size limit n Kbyte, Mbyte
Some email service providers place a limit on the size of an email attachment that they will
accept, you can use this parameter to ensure that the limit is not exceeded. The traffic analyser
and event logger can generate substantial files, and it may be required that these files are
truncated when sent as email attachments. The size is specified in kilobytes. For example,
setting this limit to 250 truncates the attachment to 250kB before transmission. Setting the size
to 0 means that no limits are imposed.
If the email template does not contain one, use "Reply To" address
This address is inserted into the email header if no reply address exists in the appropriate email
template. If the email template does contain an address in the reply to: field, that will override
the default reply address.
Route using Routing table, Interface x,y
When selected, the routing code determines the outbound interface, and that interface
determines the source IP address. If the Route using routing table option is not selected, the
settings in the interface and interface instance text boxes determine the outbound interface and
source IP address. These are selected from the drop-down selection box and are None, PPP, and
Ethernet.
Resend the email after s seconds if the first attempt fails
This setting and associated text entry box enable the retry mechanism. If the first attempt to
deliver the email fails, the router waits the specified number of seconds (which must be non-
zero) before making another attempt.
Digi TransPort WR Routers User Guide
SMTP Account parameters
639