Digi TransPort WR31 User Manual page 290

Configure network interfaces
Reopen Closed Socket
Enables an always-on mode. If the socket is closed for any reason, the router attempts to
reconnect to the remote host.
Socket ID
Used in conjunction with Send Socket ID. The text entered is transmitted when the socket
connects. You can use \r for CR and \n r NL. To specify hexadecimal, use \xhh where hh is the
hexadecimal code. For example \x04 defines binary character 04.
Send serial data only when the match string is present
Enables or disables the match string function.
Match String
When enabled, forwards serial data to remote hosts only when the Match String text is present.
Strip match string before sending
When enabled, the text in the Match String field is removed before forwarding the data to the
remote host.
Remote host
Up to five remote hosts can be specified in these fields.
Host
Enter the hostname or IP address of the remote host in this field.
Port
Enter the TCP or UDP port number that the remote host is listening on.
Add
Click this button to add the remote host.
Related CLI commands
Entity Instance Parameter
multitx 0 enabled
multitx 0 srcport
multitx 0 prot1
multitx 0 send_sockid
multitx 0 keepopen
multitx 0 sockid
Digi TransPort WR Routers User Guide
Values
off, on
off, on (default: off)
off, on (default: off)
0-255 (default: 0)
off, on
Configure serial interfaces
Equivalent web parameter
Enable MultiTX
Serial Port
protocol
Send Socket ID
Reopen Closed Socket
Socket ID
290