Digi TransPort WR31 User Manual page 164

Configure network interfaces
MAC Address
The Ethernet source MAC address to allow. It is possible to allow a range of MAC addresses by
configuring only the significant part of the MAC address. such as 00:04:2d will allow all Ethernet
packets with a source MAC address starting with 00:04:2d.
Related CLI commands
Entity Instance Parameter
eth n macfilt
macfilt n mac
Digi TransPort WR Routers User Guide
Values Equivalent web parameter
on, off Enable MAC filtering on Ethernet interfaces
MAC address MAC Address
with no
separators.
Partial MAC
address are
allowed.
Configure Ethernet interfaces
164