Digi TransPort WR31 User Manual page 549

Configure legacy protocols
Entity Instance
tpad n
tpad n
tpad n
tpad n
tpad n
tpad n
tpad n
tpad n
tpad n
tpad n
tpad n
tpad n
tpad n
tpad n
tpad n
tpad n
tpad n
Digi TransPort WR Routers User Guide
Parameter Values
tenqdel 0-5000
tackdel 0-10000
dsync 1=enabled, 0=disabled
inclrc 1=enabled, 0=disabled
incllrc 1=enabled, 0=disabled
fpar 1=enabled, 0=disabled
lrpar 1=enabled, 0=disabled
lfpar 1=enabled, 0=disabled
strip_tspaces 1=enabled, 0=disabled
ackdat 1=enabled, 0=disabled
stx_2_soh 1=enabled, 0=disabled
eot_only 1=enabled, 0=disabled
tresp 0–1000
texcess 0–100
tsla 0–3000
clear_time 0-2147483647
dialctx 0-255
Configure TPAD parameters
Equivalent web parameter
Delay sending ENQ characters to
TPAD terminal for x milliseconds
when a call has been connected.
Wait for x milliseconds for an ACK
before retransmitting the data.
Transmit TPAD transactions
directly in a Synchronous frame.
Include LRC.
Include LRC line.
Force parity when sending data to
the terminal.
Strip parity when sending data to
the host.
Force parity when sending data to
the host.
Strip Trailing Spaces.
Acknowledge TPAD data packets.
Convert leading STX character to
SOH.
Terminate TPAD call is EOT only.
Clear TPAD call if there is no
response to a TPAD transaction
request for x seconds.
Generate an event when a TPAD
transaction takes longer than x
seconds
When the transaction time exceeds
x milliseconds, increment the SLA
Exceptions statistic.
Clear the call x seconds after
receiving a response
If the terminal dial command
specifies V.120 use PANS context x.
549