Digi TransPort WR31 User Manual page 660

Configure system settings
W-WAN LED to display W-WAN, ISDN/PSTN
On the front panel of the display of models fitted with a W-WAN module, is an LED that you can
use to display the status of the W-WAN module or the status of the PSTN/ISDN connection. Use
the drop-down selection box to choose what the LED displays. The ISDN/PSTN settings depend
upon which of these two options are available on the router.
Serial LED to display Connection, DTR
On the front panel of the router is an LED dedicated to indicating the status of various signals on
the asynchronous serial line. Use the drop-down selection box to choose which signal status to
display. On modules fitted with W-WAN, this LED has additional functionality, you can use this
LED to display the W-WAN signal strength.
Related CLI commands
Entity Instance Parameter
config n powerup
cmd n anonftp
snmp n ftpnatport
snmp n ent_nb
cmd n ent_name
cmd n dnsname
cmd n gprsled_mode
cmd n asyled_mode
Digi TransPort WR Routers User Guide
Values Equivalent web parameter
0, 1 Use Config n when the router powers up
0, 1 Allow anonymous FTP login
0=Off (default)
1=On
0-65535 Additional FTP NAT port
0-65535 SNMP Enterprise Number
Default 16378
Free text field SNMP Enterprise Name
Valid Domain name, Only resolve DNS request for domain
such as
mydomain.org
0, 1 W-WAN LED to display W-WAN, ISDN/PSTN
0=W-WAN
1=ISDN/PSTN
0, 1 Serial LED to display Connection, DTR
0=Connection
1=DTR status
2=W-WAN signal strength
General system parameters
660