Digi TransPort WR31 User Manual page 806

Manage networks and connections
Related CLI commands (not available via the web interface)
)
Entity Instance Parameter
ana 0 fcon
ana 0 stopbufs
ana 0 stopmsgs
ana 0 stopflood
ana 0 lowbufcmd
ana 0 lowbuflev
ana 0 lowmsgcmd
ana 0 lowmsglev
ana 0 logdrive
ana 0 logfile
ana 0 contfile
ana 0 logsizek
Digi TransPort WR Routers User Guide
Values Action
on, off Enables serial flow control tracing.
0-255 Stops Analyser when number of free system
buffers matches this value.
0-255 Stops Analyser when number of free system
messages matches this value.
0-1 Stops Analyser when Ethernet flood protection is
activated.
Command String Run this command when the number of free
system buffers match lowbuflvel.
Integer Displays the free system buffer threshold that
lowbufcmd uses.
Command String Run this command when the number of free
system messages match lowmsglvel.
Integer Displays the free system message threshold that
lowmsgcmd uses.
String Specifies an alternate file system drive on which to
store the Analyser trace. To use an external USB
flash device, this should be set to u:
If the router has an internal SDIO flash device,
select it by specifying s:
Filename Stores the Analyser trace in the named file on an
alternate drive.
Filename Stores the Analyser trace in the named file on an
alternate drive once the file indicated by logfile is
reaches its max size as specified by logsizek.
Value in Kbytes Sets the maximum size in Kbytes of the file on the
alternate drive.
When set to 0, the file size is only limited by the
flash device.
Use the Analyser
801