Digi TransPort WR31 User Manual page 125

Hide thumbs Also See for TransPort WR31:
Table of Contents

Advertisement

Use the command-line interface
IP node
The IP node consists of the ipforwarding variable and the ipaddrtable and iproutetable nodes.
at\smib=mib-2.ip.ipforwarding
Indicates whether the router is acting as an IP gateway in respect to the forwarding of
datagrams received by, but not addressed to, the router. IP gateways forward datagrams, IP
hosts do not. For the router, this value is always 1.
at\smib=mib-2.ip.ipaddrtable
The ipaddrtable node contains ipaddrentry nodes for each IP address assigned to each
interface of the router. For each table entry, an index specifier must be appended to the end of
each variable that specifies the interface (such as for PPP0, 1 must be appended).
at\smib=mib-2.ip.ipaddrtable.ipaddrentry
at\smib=mib-2.ip.ipaddrtable.ipaddrentry.ipadentaddr
The IP address to which this entry's addressing information pertains.
at\smib=mib-2.ip.ipaddrtable.ipaddrentry.ipadentifindex
The index identifier for the interface associated with this IP address.
at\smib=mib-2.ip.ipaddrtable.ipaddrentry.ipadentnetmask
The subnet mask associated with the IP address.
at\smib=mib-2.ip.ipaddrtable.ipaddrentry.ipadentbcastaddr
The value of the least-significant bit in the IP broadcast address for sending datagrams on the IP
address of this interface.
at\smib=mib-2.ip.iproutetable
The iproutetable node contains iprouteentry nodes for each route defined on the router.
at\smib=mib-2.ip.iproutetable.iprouteentry
at\smib=mib-2.ip.iproutetable.iprouteentry.iproutedest
The destination IP address for the route. An entry with a value of 0.0.0.0 is considered the
default route. Multiple routes to a single destination can appear in the routing table, but access
to such multiple entries is dependent on the table-access mechanisms defined by the network
management protocol in use.
at\smib=mib-2.ip.iproutetable.iprouteentry.iprouteifindex
The index value which uniquely identifies the local interface through which the next hop of the
route should be reached.
Digi TransPort WR Routers User Guide
AT commands
125

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents