Digi TransPort WR31 User Manual page 76

Hardware
TransPort WR44 R
1 Mounting holes.
2 SIM slot cover plate mounting hole.
3 Reset button: The reset button allows the user to return the router to its factory default settings.
It is recessed [to avoid accidental reset], and can be accessed via a small 2.5mm hole located on
the underside of the router.
Reset the TransPort WR44/WR44 R
1 Turn the router on and wait 15 seconds for the router to complete its initialization process.
2 Press and hold the reset button gently for 5 seconds. After this time, the router will automatically
re-boot and display a pattern of alternating LEDs flashing followed by the normal boot
sequence.
CAUTION!
Digi TransPort WR Routers User Guide
[Front of Unit]
3
[Rear of Unit]
Do not remove power from the router during this operation, as corruption of the flash
memory may occur.
TransPort WR44 / WR44 R hardware
76