Digi TransPort WR31 User Manual page 842

Device administration
Create, enroll, and install certificate requests
The Enrollment section of the page has parameters to create a certificate request, enroll the
certificate, and install the certificates on the router.
Automatically re-enrol aging certificates
Select to make sure any aging certificates are re-enrolled.
SCEP Server IP address
The IP address of the SCEP server / CA server.
Port
The port on which the SCEP server is listening. If the port is 0, the router uses the default port of
80.
Path
The path on the server to the SCEP application. You can either enter your own path or select
from cgi-bin or Microsoft SCEP from the drop-down list.
Application
The SCEP application running on the server.
CA identifier
The identifier for the CA server. The CA identifier to use to identify a particular CA when multiple
CAs might be running on the server.
Digi TransPort WR Routers User Guide
Manage X.509 certificates and host key pairs
831