Stateful Inspection Settings Parameters - Digi TransPort WR31 User Manual

Configure security settings
Related CLI commands
Entity Instance Parameter
user 0 name
user 0 password
user 0 access
Change the default username and password for a user
By default, the username for each supported user is username and the password is password. To
increase security, change the username and password for device users from these defaults.
Note Record the new password. If the changed password is lost, the router must be reset to the
default firmware settings.
In the web interface:
1 From the main menu, navigate to Configuration > Security> Users> User n.
2 In the Username field, enter the new user name. Up to 14 characters are allowed in a username.
For additional details on the username, see
3 In the Password / Confirm Password field, enter the new password. For additional details on the
password, see
4 Select the access level for the user: Super, High, Medium, Low, Read Only, or None.
Descriptions of these access levels is in
Click Apply. From the command line:
Issue the user command, specifying the name, password, and access parameters.
Digi TransPort WR Routers User Guide
Values
String
(up to 40 chars)
String
(up to 40 chars)
0=Super
1=High
2=Medium
3=Low
4=None
8=Read Only
User system security setting.
User system security
Equivalent web parameter
Username
Password
Access Level
User system security setting.
setting.
User security settings
682