Digi TransPort WR31 User Manual page 802

Manage networks and connections
LAPB Links
Selects the LAPB links over which packets are captured and included in the Analyser trace.
Serial Interfaces
Selects the serial interfaces over which packets will be captured and included in the Analyser
trace. The list of available interfaces include the physical serial interfaces, internal virtual serial
interfaces (if present), and interfaces the built-in WWAN and/or PSTN modems use.
Ethernet Interfaces
Selects the Ethernet interfaces over which packets are captured and included in the Analyser
trace.
Raw SYNC Sources
Selects the synchronous sources over which packets are captured and included in the Analyser
trace.
DSL PVC Sources
Selects the ADSL ATM PVCs over which packets are captured and included in the Analyser trace.
PPP Interfaces
Selects the PPP interfaces over which packets are captured and included in the Analyser trace.
IP Sources
Selects the IP sources over which packets are captured and included in the Analyser trace. These
sources include IP packets transmitted and received over Ethernet, PPP and OpenVPN (OVPN)
interfaces. It is also possible to select GRE Tunnels via the advanced sections of the individual
GRE Tunnel configuration pages.
IP Options
Trace discarded packets
Enables or disables the capture of packets that are discarded by an interface, and displays a
reason for why the packet was discarded.
Trace loopback packets
Enables or disables the capture of IP loopback packets.
Digi TransPort WR Routers User Guide
Use the Analyser
797