Digi TransPort WR31 User Manual page 578

Configure legacy protocols
20 Echo mask
Defines characters that are not echoed when echo mode has been enabled using parameter 2.
Option
0
1
2
4
8
16
32
64
128
Combinations of the above sets of characters are possible by adding the respective values
together.
21 Parity treatment
Sets use of parity generation/checking.
Option
0
1
2
3
22 Page wait
Determines how many line feeds are sent to the terminal before output is halted on a page wait
condition. In other words, it defines the page length for paged mode output. A page wait
condition is cleared when the PAD receives a character from the terminal
Option
0
1
Related CLI commands
To edit the X.3 PAD parameters from the command line, use the set command, described in
commands.
Digi TransPort WR Routers User Guide
Description
No echo mask (all characters are echoed)
CR
LF
VT, HT or FF
BEL, BS
ESC,ENQ
ACK,NAK,STX,SOH,EOT,ETB,ETX
No echo of characters set by parameters 16, 17 & 18
No echo of characters set by parameters 16, 17 & 18
Description
No parity generation or checking
Parity checking on
Parity generation on
Parity checking and generation on
Description
Page wait feature disabled
Number of line feeds sent before halting output
Configure X.25 parameters
X.28
578