Show Controllers (Ethernet) - Cisco ASR 9000 Series Command Reference Manual

Ethernet Interface Commands on the Cisco ASR 9000 Series Router

show controllers (Ethernet)

To display status and configuration information about the Ethernet interfaces on a specific node, use the show
controllers command in EXEC mode.
show controllers {GigabitEthernet| TenGigE} interface-path-id [all| bert| internal| mac| phy| stats| xgxs]
Syntax Description
{GigabitEthernet |
TenGigE}
interface-path-id
all
bert
internal
mac
phy
stats
xgxs
Command Default
No default behavior or values
Command Modes
EXEC mode
Command History
Release
Release 3.7.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Specifies the type of Ethernet interface whose status and configuration
information you want to display. Enter GigabitEthernet or TenGigE.
Physical interface or virtual interface.
Use the show interfaces command to see a list of all interfaces currently
Note
configured on the router.
For more information about the syntax for the router, use the question mark (?)
online help function.
Displays detailed information for the specified interface.
Displays BERT status information for the interface.
Displays internal information for the interface.
Displays mac information for the interface.
Displays physical information for the interface.
Displays statistical information for the interface.
Displays information about the 10 Gigabit Ethernet Extended Sublayer (XGXS).
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Modification
This command was first introduced.

show controllers (Ethernet)

Release 5.3.x
105