Iphc Profile - Cisco ASR 9000 Series Command Reference Manual

Aggregation services router
Hide thumbs Also See for ASR 9000 Series:
Table of Contents

Advertisement

Serial Interface Commands on the Cisco ASR 9000 Series Router

iphc profile

To create an IP header compression (IPHC) profile and enter the IPHC profile configuration mode, use the
iphc profile command in configuration mode. To remove the profile, use the no form of this command.
iphc profile profile-name type {ietf| iphc}
no iphc profile profile-name [type {ietf| iphc}]
Syntax Description
profile-name
type
ietf
iphc
Command Default
No default behavior or values
Command Modes
Configuration
Command History
Release
Release 4.0.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
After you create a profile and enter the IPHC profile configuration mode, you can configure IPHC features
in the profile and attach the profile to multiple interfaces. The maximum number of profiles allowed on a
router is 250.
A profile cannot be deleted if it is attached to any interfaces. You must remove the profile from all interfaces
first. Then, delete the profile using the no form of this command.
On-the-fly modifications to IPHC profiles are not supported.
A profile name cannot exceed 50 characters. If you attempt to create a profile name that exceeds 50 characters,
you receive the following error message:
iphc profile test1test1test1test1test1test1test1test1test1test11 type iphc
!!% 'iphc_profilemgr' detected the 'warning' condition
Text name for the IPHC profile. The maximum number of characters is 50.
Specifies the type of compression format.
Specifies Internet Engineering Task Force (IETF) standard format. Uses RFC2507
and RFC2508 compression schemes.
Specifies Internet Protocol Header Compression (IPHC) format.Provides options
similar to IETF.
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Modification
This command was introduced.
iphc profile
Release 5.3.x
791

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents