Cisco Asr 9000 Series Aggregation Services Router Interface And Hardware Component Command Reference - Cisco ASR 9000 Series Command Reference Manual

Link Bundling Commands on the Cisco ASR 9000 Series Router
Field
BFD
Links act/stby/cfgd
Local b/w, kbps
Related Commands
Command
show bundle, on page 619

Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,

Description
When BFD is enabled, displays the state of BFD
sessions on the bundle from the sessions running on
bundle members that is communicated to interested
protocols, with the following possible values:
• Down—The configured minimim threshold for
active links or bandwidth for BFD bundle
members is not available so BFD sessions are
down.
• Off—BFD is not configured on bundle
members.
• Up—BFD sessions on bundle members are up
because the minimum threshold for the number
of active links or bandwidth is met.
Number of links on the bundle with a particular status
in the format x/y/z, with the following values:
• x—Number of links in Active state on the
bundle for the local device (from 1 to the
maximum number of links supported on the
bundle).
• y—Number of links in Standby state on the
bundle for the local device (from 1 to the
maximum number of links supported on the
bundle).
• z—Total number of links configured on the
bundle for the local device (from 1 to the
maximum number of links supported on the
bundle).
Current bandwidth of the bundle on the local device
(this effective bandwidth might be limited by
configuration).
Description
Displays information about configured bundles.
show bundle brief
Release 5.3.x
637