Action Session-Down - Cisco ASR 9000 Series Command Reference Manual

Ethernet OAM Commands on the Cisco ASR 9000 Series Router

action session-down

To configure what action is taken on an interface when an Ethernet OAM session goes down, use the action
session-down command in Ethernet OAM configuration mode or interface Ethernet OAM configuration
mode. To return to the default, use the no form of this command.
action session-down {disable| efd | error-disable-interface| log}
no action session-down {disable| efd | error-disable-interface| log}
Syntax Description
disable
efd
error-disable-interface
log
Command Default
The default action is to create a syslog entry.
Command Modes
Ethernet OAM configuration (config-eoam)
Interface Ethernet OAM configuration (config-if-eoam)
Command History
Release
Release 3.9.0
Release 4.0.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
ethernet-services
Performs no action on the interface when a capabilities-conflict event occurs.
Puts the line protocol into the down state for an interface when a capabilities-conflict
event occurs. The state is removed when the first packet is received without a
conflict.
Puts the interface into the error-disable state when a capabilities-conflict event
occurs.
(Interface Ethernet OAM configuration only) Creates a syslog entry when a
capabilities-conflict event occurs. This action is available only in interface Ethernet
OAM configuration mode to override the OAM profile on a specific interface.
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Modification
This command was introduced.
The efd keyword was added.
Operations
read, write

action session-down

Release 5.3.x
147