Ethernet OAM Commands on the Cisco ASR 9000 Series Router
log ais
To configure AIS logging for a Connectivity Fault Management (CFM) domain service to indicate when AIS
or LCK packets are received, use the log ais command in CFM domain service configuration mode. To disable
AIS logging, use the no form of this command.
log ais
no log ais
Syntax Description
This command has no keywords or arguments.
Command Default
Logging is disabled.
Command Modes
CFM domain service configuration (config-cfm-dmn-svc)
Command History
Release
Release 3.9.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
ethernet-services
Related Commands
Command
ais transmission, on page 157
ais transmission up, on page 159
show ethernet cfm interfaces ais, on page 324
show ethernet cfm local meps, on page 333
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Modification
This command was introduced.
Operations
read, write
Description
Configures AIS transmission for a CFM domain service.
Configures AIS transmission on a CFM interface.
Displays the information about interfaces that are currently
transmitting AIS.
Displays information about local MEPs.
log ais
Release 5.3.x
263