Action Discovery-Timeout - Cisco ASR 9000 Series Command Reference Manual

Ethernet OAM Commands on the Cisco ASR 9000 Series Router

action discovery-timeout

To configure what action is taken on an interface when a connection timeout occurs, use the action
discovery-timeout command in Ethernet OAM configuration mode or interface Ethernet OAM configuration
mode. To return to the default, use the no form of this command.
action discovery-timeout {disable| efd error-disable-interface| log}
no action discovery-timeout {disable| efd error-disable-interface| log}
Syntax Description
disable
efd
error-disable-interface
log
Command Default
The default action is to create a syslog entry.
Command Modes
Ethernet OAM configuration (config-eoam)
Interface Ethernet OAM configuration (config-if-eoam)
Command History
Release
Release 3.9.0
Release 4.0.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
ethernet-services
Performs no action on the interface when a connection timeout occurs.
Puts the line protocol into the down state for an interface when a connection timeout
occurs. The state is removed when the session is re-established.
Puts the interface into the error-disable state when a connection timeout occurs.
(Interface Ethernet OAM configuration only) Creates a syslog entry when a
connection timeout occurs. This action is available only in interface Ethernet OAM
configuration mode to override the OAM profile on a specific interface.
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Modification
This command was introduced.
The efd keyword was added.
Operations
read, write

action discovery-timeout

Release 5.3.x
139