Extension Remote-Uni Disable - Cisco ASR 9000 Series Command Reference Manual

Ethernet OAM Commands on the Cisco ASR 9000 Series Router

extension remote-uni disable

To disable transmission of the Cisco-proprietary Remote UNI Details information element in Ethernet LMI
(E-LMI) STATUS messages, use the extension remote-uni disable command in interface Ethernet LMI
configuration mode. To return to the default, use the no form of the command.

extension remote-uni disable

no extension remote-uni disable
This command has no keywords or arguments.
Command Default
The Cisco-proprietary Remote UNI Details information element is sent in E-LMI STATUS messages.
Command Modes
Interface Ethernet LMI configuration (config-if-elmi)
Command History
Release
Release 4.1.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Use the extension remote-uni disable command to have stricter conformance to the MEF 16 E-LMI
specification for information elements in STATUS messages.
Task ID
Task ID
ethernet-services
Examples The following example shows how to disable transmission of the Cisco-proprietary Remote UNI Details
information element:
RP/0/RSP0/CPU0:router# interface gigabitethernet 0/1/0/0
RP/0/RSP0/CPU0:router(config-if)# ethernet lmi
RP/0/RSP0/CPU0:router(config-if-elmi)# extension remote-uni disable
Related Commands
Command
interface (Ethernet), on page 85
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Modification
This command was introduced.
Operation
read, write
Description
Specifies or creates an Ethernet interface and enters interface
configuration mode.
extension remote-uni disable
Release 5.3.x
247