Cisco Asr 9000 Series Aggregation Services Router Interface And Hardware Component Command Reference - Cisco ASR 9000 Series Command Reference Manual

Dense Wavelength Division Multiplexing Commands on the Cisco ASR 9000 Series Router
threshold
Command Default
No thresholds are configured.
Command Modes
DWDM configuration
Command History
Release
Release 3.9.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
To display performance measurement information for the OTN layer, use the show controller dwdm pm
otn command.
Task ID
Task ID
dwdm
Examples The following example shows how to configure an OTN layer performance monitoring threshold for path
monitoring errored seconds ratio (ESR-PM):
RP/0/RSP0/CPU0:router(config)# controller dwdm 0/0/0/0
RP/0/RSP0/CPU0:router(config-dwdm)# pm 15-min otn threshold esr-pm-ne 500000
Related Commands
Command
show controller dwdm pm, on page 63
Threshold for the performance monitoring parameter.

Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,

Modification
This command was introduced.
Operations
read, write
Description
Displays performance monitoring information for a DWDM
controller.
pm otn threshold
Release 5.3.x
45