Show Controllers Sonet - Cisco ASR 9000 Series Command Reference Manual

show controllers sonet

show controllers sonet
To display information about the operational status of SONET layers, use the show controllers sonet command
in EXEC mode.
show controllers sonet interface-path-id {all| framers| internal-state}
Syntax Description
interface-path-id
all
framers
internal-state
Command Default
No default behavior or values
Command Modes
EXEC
Command History
Release
Release 3.9.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
For the interface-path-id argument, use the following guidelines:
• If specifying a physical interface, the naming notation is rack/slot/module/port. The slash between values
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
906
Physical interface or virtual interface.
Note
For more information about the syntax for the router, use the question mark
(?) online help function.
Displays all information.
Displays framer information.
Displays internal SONET state.
is required as part of the notation. An explanation of each component of the naming notation is as follows:
◦ rack: Chassis number of the rack.
◦ slot: Physical slot number of the line card.
◦ module: Module number. A physical layer interface module (PLIM) is always 0.
◦ port: Physical port number of the interface.
SONET Controller Commands on the Cisco ASR 9000 Series Router
Use the show interfaces command to see a list of all interfaces
currently configured on the router.
Modification
This command was introduced.