Clear Ethernet Sla Statistics On-Demand - Cisco ASR 9000 Series Command Reference Manual

Ethernet OAM Commands on the Cisco ASR 9000 Series Router

clear ethernet sla statistics on-demand

To delete the contents of buckets containing SLA statistics collected by on-demand probes, use the clear
ethernet sla statistics on-demand command in EXEC mode.
clear ethernet sla statistics [current| history] on-demand {all| id} [interface type interface-path-id domain
all| interface type interface-path-id domain domain-name target {all| mac-address H.H.H| mep-id id}|
interface all domain domain-name]
Syntax Description
current
history
all
id
interface type
interface-path-id
domain all
domain domain-name
target all
target mac-address H.H.H
target mep-id id
interface all
Command Default
When current or history are not used, all buckets for on-demand operations (current, old, new, half empty,
and full) are cleared. This is equivalent to restarting the operation.
Command Modes
EXEC (#)
(Optional) Clears statistics for all buckets currently being filled.
(Optional) Clears statistics for all full buckets.
Clears statistics for all on-demand operations.
Clears statistics for the on-demand operation of the specified number.
(Optional) Clears statistics for the specified interface type. For more
information, use the question mark (?) online help function.
Physical interface or virtual interface.
Note
For more information about the syntax for the router, use the question mark
(?) online help function.
Clears statistics for on-demand operations for all domains.
Clears statistics for on-demand operations for the specified domain.
Clears statistics for on-demand operations targeted to all MEPs for the
specified interface domain.
Clears statistics for on-demand operations targeted to the specified MAC
address.
Clears statistcs for on-demand operations targeted to the specified MEP ID.
(Optional) Clears statistics for on-demand operations on all interfaces.
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Use the show interfaces command to see a list of all interfaces
currently configured on the router.

clear ethernet sla statistics on-demand

Release 5.3.x
181