Mlacp Node - Cisco ASR 9000 Series Command Reference Manual

Link Bundling Commands on the Cisco ASR 9000 Series Router

mlacp node

To configure the mLACP node ID to be used in the ICCP group, use the mlacp node command in the
redundancy ICCP group configuration mode. To return to the default value, use the no form of this command.
mlacp node node-id
no mlacp node node-id
Syntax Description
node-id
Command Default
No default behavior or values
Command Modes
Redundancy ICCP group configuration
Command History
Release
Release 4.0.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
bundle
Examples This example shows how to configure the mLACP node ID to be used in the ICCP group:
RP/0/RSP0/CPU0:router#
RP/0/RSP0/CPU0:router(config)# redundancy iccp group 10
RP/0/RSP0/CPU0:router(config-redundancy-iccp-group)# mlacp node 3
Related Commands
redundancy iccp group
Specifies the unique node ID in the ICCP group for this system. The node-id value
ranges between 0 to 7.
configure
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Modification
This command was introduced.
Operations
read, write
Configures ICCP parameters.
mlacp node
Release 5.3.x
611