Link Bundling Commands on the Cisco ASR 9000 Series Router
Examples
The following example enables the use of Cisco TLVs to include link order numbering as part of the LACP
processing on this bundle:
RP/0/RSP0/CPU0:router(config)# interface Bundle-Ether 100
RP/0/RSP0/CPU0:router(config-if)# lacp cisco enable link-order signaled
Related Commands
Command
interface (bundle), on page 590
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Description
Specifies or creates a new bundle and enters interface configuration
mode for that bundle.
lacp cisco enable
Release 5.3.x
593