Cisco Asr 9000 Series Aggregation Services Router Interface And Hardware Component Command Reference - Cisco ASR 9000 Series Command Reference Manual

remote-loopback
RP/0/RSP0/CPU0:router(config-if-eoam)# profile Profile_1
RP/0/RSP0/CPU0:router(config-if-eoam)# remote-loopback
Related Commands
Command
ethernet oam profile, on page 215
ethernet oam, on page 212
ethernet oam loopback, on page 213
profile (EOAM), on page 299
show ethernet oam configuration, on page
366
show ethernet oam interfaces, on page 374

Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,

Release 5.3.x
304
Ethernet OAM Commands on the Cisco ASR 9000 Series Router
Description
Creates an EOAM profile and enters EOAM configuration mode.
Enables Ethernet Link OAM, with default values, on an interface
and enter interface Ethernet OAM configuration mode.
Starts or stops a loopback at the remote end of an Ethernet OAM
interface.
Attaches an Ethernet OAM profile to an interface.
Displays the current active Ethernet OAM configuration on an
interface.
Displays the current state of Ethernet OAM interfaces.