Redundancy - Cisco ASR 9000 Series Command Reference Manual

PPP Commands onthe Cisco ASR 9000 Series Router

redundancy

To enter the redundancy configuration mode to configure Multi-Router Automatic Protection Switching
(MR-APS), use the redundancy command in global configuration mode.
redundancy
Syntax Description
This command has no keywords or arguments.
Command Default
No default behavior or values
Command Modes
Global configuration
Command History
Release
Release 3.9.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
ppp
Examples
The following example shows how to enter the redundancy configuration mode:
RP/0/RSP0/CPU0:router# config
RP/0/RSP0/CPU0:router(config)# redundancy
RP/0/RSP0/CPU0:router(config-redundancy)#
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Modification
This command was introduced.
Operations
read
redundancy
Release 5.3.x
755