Serial Interface Commands on the Cisco ASR 9000 Series Router
show tech-support iphc
To collect and display IP header compression (IPHC) data for an interface, node, or rack, and store that data
in a file, use the show tech-support iphc command in EXEC mode.
show tech-support iphc [file| interface type interface-path-id [location node-id| rack rack_name]| location
node-id| rack rack_name] file location file_name [background] [compressed| uncompressed]
Syntax Description
file
interface
type
interface-path-id
location node-id
rack rack_name
(Optional) Specifies a file name and location for IPHC data to be saved to.
(Optional) Collects IPHC data for the specified interface.
(Optional) Interface type. For more information, use the question mark (?) online
help function.
(Optional) Physical interface or virtual interface.
Use the show interfaces command to see a list of all interfaces currently
Note
configured on the router.
For more information about the syntax for the router, use the question mark (?) online
help function.
(Optional) Collects IPHC data for the specified card location (node-id).
(Optional) Collects IPHC data for the specified rack.
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
show tech-support iphc
Release 5.3.x
823