Bundle Wait-While - Cisco ASR 9000 Series Command Reference Manual

bundle wait-while

bundle wait-while
To specify the duration of the wait-while timer for a bundle, use the bundle wait-whilebundle wait-while
command in the bundle interface configuration mode. To disable waiting, use the noform of the command.
bundle wait-while time
nobundle wait-while time
Syntax Description
time
Command Default
2000 milliseconds
Command Modes
Bundle Interface Configuration
Command History
Release
Release 4.0.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper task
IDs. If you suspect user group assignment is preventing you from using a command, contact your AAA
administrator.
Task ID
Task ID
bundle
interface
Examples In the following example, the while-while time is configured for 20 seconds:
RP/0/RSP0/CPU0:router(config-if)bundle wait-while 20
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
496
Global Interface Commandsonthe Cisco ASR 9000 Series Router
Wait-while time in milliseconds, range is 0-2000.
Modification
This command was introduced.
Operation
read, write
read, write