Refresh Max-Period - Cisco ASR 9000 Series Command Reference Manual

Serial Interface Commands on the Cisco ASR 9000 Series Router

refresh max-period

To configure the maximum number of compressed IP header packets exchanged on a link before IPHC context
is refreshed, use the refresh max-period command in IPHC profile configuration mode. To return to the
default context refresh settings, use the no form of this command.
refresh max-period {max-number| infinite}
no refresh max-period [max-number| infinite]
Syntax Description
max- number
infinite
Command Default
max-number: 256
Command Modes
IPHC profile configuration
Command History
Release
Release 4.0.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
To enable the configured context refresh settings for RTP packets, the refresh rtp command must be used.
The maximum period between context refreshes can be set only within an IPHC profile.
Note
Task ID
Task ID
ip-services
Maximum number of compressed IP header packets allowed between full headers
or before the context is refreshed. Range is from 0 to 65535.
Allows an unlimited number of packets to be exchanged before context refresh.
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Modification
This command was introduced.
Operations
read, write
refresh max-period
Release 5.3.x
801