Ppp Multilink Multiclass - Cisco ASR 9000 Series Command Reference Manual

PPP Commands onthe Cisco ASR 9000 Series Router

ppp multilink multiclass

To enable multiclass multilink PPP, use the ppp multilink multiclass command in interface configuration
mode. To disable multiclass multilink PPP, use the no form of this command.
ppp multilink multiclass
no ppp multilink multiclass
Syntax Description
This command has no keywords or arguments.
Command Default
No default behavior or values
Command Modes
Interface configuration
Command History
Release
Release 3.9.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
ppp
Examples The following example shows how to enable multiclass multilink PPP:
RP/0/RSP0/CPU0:router# config
RP/0/RSP0/CPU0:router(config)# interface Multilink 0/1/0/0/1
RP/0/RSP0/CPU0:router(config-if)# ppp multilink multiclass
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Modification
This command was introduced.
Operations
read, write
ppp multilink multiclass
Release 5.3.x
743