Cisco ASR 9000 Series Command Reference Manual page 985

T3, E3, T1, E1 Controller Commands on the Cisco ASR 9000 Series Router
Task ID
Task ID
dwdm
interface
sonet-sdh
Examples The following example shows how to clear controller data for T3 controller 1 that is located in chassis 0, for
a SIP installed in slot 6 with a SPA in subslot 2, and port 0 with T3 controller 1:
RP/0/RSP0/CPU0:router(config)# controller t3 0/6/2/0/1
Related Commands
Command
controller t3, on page 976
show controllers t3, on page 1054
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Operations
read, write
read, write
read, write
Description
Configures a T3 controller and enters T3 configuration mode.
Displays information about the T3 links and hardware and software
drivers for the T3 controller.
clear controller t3
Release 5.3.x
965