Ethernet OAM Commands on the Cisco ASR 9000 Series Router
Task ID
Task ID
ethernet-services
Examples
The following example shows how to configure the class of service (CoS) for a maintenance end point (MEP)
on an interface.
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# interface gigabitethernet 0/1/0/1
RP/0/RSP0/CPU0:router(config-if)# ethernet cfm mep domain Dm1 service Sv1 mep-id 1
RP/0/RSP0/CPU0:router(config-if-cfm-mep)# cos 7
Related Commands
Command
ethernet cfm (interface), on page 209
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Operations
read, write
Description
Enters interface CFM configuration mode.
cos (CFM)
Release 5.3.x
195