Lldp (Interface) - Cisco ASR 9000 Series Command Reference Manual

Ethernet Interface Commands on the Cisco ASR 9000 Series Router

lldp (interface)

To enter LLDP configuration mode, use the lldp (interface) command.
lldp
Syntax Description
This command has no keywords or arguments.
Command Default
None
Command Modes
Interface configuration (config-if)
Command History
Release
Release 4.1.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
ethernet-services
interface
Examples This example shows how to enter LLDP configuration mode from Ethernet interface configuration mode:
RP/0/RSP0/CPU0:router(config)# interface GigabitEthernet 0/1/0/0
RP/0/RSP0/CPU0:router(config-if)# lldp
RP/0/RSP0/CPU0:router(config-lldp)#
Related Commands
Command
interface (Ethernet), on page 85
lldp, on page 87
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Modification
This command was introduced.
Operation
read, write
read, write
Description
Specifies or creates an Ethernet interface and enters interface
configuration mode.
Enables LLDP globally for both transmit and receive operation on
the system.

lldp (interface)

Release 5.3.x
89