Cisco Asr 9000 Series Aggregation Services Router Interface And Hardware Component Command Reference - Cisco ASR 9000 Series Command Reference Manual

Ethernet OAM Commands on the Cisco ASR 9000 Series Router
RP/0/RSP0/CPU0:router(config)# ethernet cfm
RP/0/RSP0/CPU0:router(config-cfm)# domain Domain_One level 1 id string D1
RP/0/RSP0/CPU0:router(config-cfm-dmn)# service Bridge_Service bridge group BD1 bridge-domain
B1
RP/0/RSP0/CPU0:router(config-cfm-dmn-svc)# maximum-meps 4000
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# ethernet cfm
RP/0/RSP0/CPU0:router(config-cfm)# domain Domain_One level 1 id string D1
RP/0/RSP0/CPU0:router(config-cfm-dmn)# service Cross_Connect_1 xconnect group XG1 p2p X1
RP/0/RSP0/CPU0:router(config-cfm-dmn-svc)# maximum-meps 4000
Related Commands
Command
domain, on page 201
ethernet cfm (global), on page 207
ethernet cfm (interface), on page 209
service, on page 314
show ethernet cfm configuration-errors, on page
322
show ethernet cfm local maintenance-points, on
page 330
show ethernet cfm local meps, on page 333
show ethernet cfm peer meps, on page 339

Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,

Description
Enters CFM configuration mode.
Enters interface CFM configuration mode.
Displays information about errors that are preventing
configured CFM operations from becoming active, as well
as any warnings that have occurred.
Displays a list of local maintenance points.
Displays information about local MEPs.
Displays information about maintenance end points
(MEPs) for peer MEPs.
maximum-meps
Release 5.3.x
275