Clear Ethernet Cfm Traceroute-Cache - Cisco ASR 9000 Series Command Reference Manual

Ethernet OAM Commands on the Cisco ASR 9000 Series Router

clear ethernet cfm traceroute-cache

To remove the contents of the traceroute cache, use the clear ethernet cfm traceroute-cache command in
EXEC mode.
clear ethernet cfm traceroute-cache {all| domain domain-name {all| service service-name {all| mep-id
id}}| interface interface-name {all| domain domain-name}}
Syntax Description
domain domain-name
service service-name
mep-id id
interface interface-name
Command Default
No default behavior or values
Command Modes
EXEC (#)
Command History
Release
Release 3.7.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
ethernet-services
String of a maximum of 80 characters that identifies the domain in which
the maintenance points reside.
Note
String of a maximum of 80 characters that identifies the maintenance
association to which the maintenance end points belong.
Maintenance end point (MEP) ID number. The range for MEP ID numbers
is 1 to 8191.
String of a maximum of 80 characters that identifies the Ethernet interface.
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
For more information about the syntax, use the question mark (?)
online help function.
Modification
This command was introduced.
Operations
execute

clear ethernet cfm traceroute-cache

Release 5.3.x
173