Redundancy One-Way - Cisco ASR 9000 Series Command Reference Manual

redundancy one-way

redundancy one-way
To enforce one-way pseudowire redundancy behavior when the redundancy group is configured, use the
redundancy one-way command in the L2VPN pseudowire class configuration mode. To return to the default,
use the no form of this command.
redundancy one-way
no redundancy one-way
This command has no keywords or arguments.
Command Default
One-way redundancy is disabled.
Command Modes
L2VPN pseudowire class configuration
Command History
Release
Release 4.0.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
l2vpn
Examples The following example shows how to :
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# l2vpn
RP/0/RSP0/CPU0:router(config-l2vpn)# pw-class class_mpls
RP/0/RSP0/CPU0:router(config-l2vpn-pwc)# encapsulation mpls
RP/0/RSP0/CPU0:router(config-l2vpn-pwc-mpls)# redundancy one-way
RP/0/RSP0/CPU0:router(config-l2vpn-pwc-mpls)#
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
618
Link Bundling Commands on the Cisco ASR 9000 Series Router
Modification
This command was introduced.
Operations
read, write