Description (Iphc Profile) - Cisco ASR 9000 Series Command Reference Manual

Serial Interface Commands on the Cisco ASR 9000 Series Router

description (IPHC profile)

To add a description to an IPHC profile, use the description command in IPHC profile configuration mode.
To remove a description for an IPHC profile, use the no form of this command.
description description
no description
Syntax Description
description
Command Default
By default, no description is attached to an IPHC profile.
Command Modes
IPHC profile configuration
Command History
Release
Release 4.0.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
ip-services
Examples In the following example, a description is attached to the IPHC profile test:
RP/0/RSP0/CPU0:router(config)# config
RP/0/RSP0/CPU0:router(config)# iphc profile test type iphc
RP/0/RSP0/CPU0:router(config-iphc-profile)# description testprofile
RP/0/RSP0/CPU0:router(config-iphc-profile)# commit
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Description to be added to the IPHC profile.
Modification
This command was introduced.
Operations
read, write
description (IPHC profile)
Release 5.3.x
781