Cisco Asr 9000 Series Aggregation Services Router Interface And Hardware Component Command Reference - Cisco ASR 9000 Series Command Reference Manual

show ethernet cfm local meps
Example 2: show ethernet cfm local meps Command Filtered by Domain and Service
RP/0/RSP0/CPU0:router# show ethernet cfm local meps domain foo service bar
A - AIS received
R - Remote Defect received
L - Loop (our MAC received)
C - Config (our ID received)
X - Cross-connect (wrong MAID)
P - Peer port down
Domain foo (level 6), Service bar
ID Interface (State)
----- ------------------------ --- -------- -- ------- ---
100 Gi1/1/0/1.234 (Up)
RP/0/0/CPU0:router# show ethernet cfm local meps domain foo service bar
A - AIS received
R - Remote Defect received
L - Loop (our MAC received)
C - Config (our ID received)
X - Cross-connect (wrong MAID)
P - Peer port down
Domain foo (level 6), Service bar
ID Interface (State)
----- ------------------------ --- -------- -- ------- ---
100 Gi1/1/0/1.234 (Up)
Example 3: show ethernet cfm local meps detail Command
This example shows sample output of detailed statistics for local MEPs:
The Discarded CCMs field is not displayed when the number is zero (0). It is unusual for the count of
Note
discarded CCMs to be anything other than zero, since CCMs are only discarded when the limit on the
number of peer MEPs is reached. The Peer MEPs field is always displayed, but the counts are always zero
when continuity check is not enabled.
RP/0/RSP0/CPU0:router# show ethernet cfm local meps detail
Domain foo (level 6), Service bar
Up MEP on GigabitEthernet0/1/0/0.234, MEP-ID 100
================================================================================
Interface state: Up
Peer MEPs: 0 up, 0 with errors, 0 timed out (archived)
CCM generation enabled:
AIS generation enabled:
Sending AIS:
Receiving AIS:
Domain fred (level 5), Service barney
Up MEP on GigabitEthernet0/1/0/0.234, MEP-ID 2
================================================================================
Interface state: Up
Peer MEPs: 3 up, 2 with errors, 0 timed out (archived)
Cross-check defects: 0 missing, 0 unexpected
CCM generation enabled:
CCM defects detected:
AIS generation enabled:

Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,

Release 5.3.x
336
Ethernet OAM Commands on the Cisco ASR 9000 Series Router
I - Wrong interval
V - Wrong Level
T - Timed out (archived)
M - Missing (cross-check)
U - Unexpected (cross-check)
Dir MEPs/Err RD Defects AIS
Up 0/0 N A
I - Wrong interval
V - Wrong Level
T - Timed out (archived)
M - Missing (cross-check)
U - Unexpected (cross-check)
Dir MEPs/Err RD Defects AIS
Up 0/0 N X
MAC address: 1122.3344.5566
No
Yes (level: 7, interval: 1s)
Yes (started 01:32:56 ago)
Yes (from lower MEP, started 01:32:56 ago)
MAC address: 1122.3344.5566
Yes (Remote Defect detected: Yes)
R - Remote Defect received
P - Peer port down
C - Config (our ID received)
Yes (level: 6, interval: 1s)
L7