Cisco Asr 9000 Series Aggregation Services Router Interface And Hardware Component Command Reference - Cisco ASR 9000 Series Command Reference Manual

Management Ethernet Interface Commands on the Cisco ASR 9000 Series Router
duplex Command
no duplex
no duplex
duplex full
duplex full
duplex full
duplex full
duplex half
duplex half
duplex half
Task ID
Task ID
interface
Examples This example shows how to configure the Management Ethernet interface to transmit at one gigabit:
RP/0/RSP0/CPU0:router(config)# interface MgmtEth 0/RSP0/CPU0/0
RP/0/RSP0/CPU0:router(config-if)# speed 1000
Related Commands
Command
interface MgmtEth, on page 668
speed Command
speed 100
speed 10
no speed
speed 1000
speed 100
speed 10
no speed
speed 100
speed 10

Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,

Operations
read, write
Description
Enters interface configuration mode for the Management Ethernet
interface.
speed (Management Ethernet)
Resulting System Action
Autonegotiates for duplex mode
and forces 100 Mbps.
Autonegotiates for duplex mode
and forces 10 Mbps.
Forces full duplex and
autonegotiates for speed.
Forces 1000 Mbps (1 Gbps) and
full duplex.
Forces 100 Mbps and full duplex.
Forces 10 Mbps and full duplex.
Forces half duplex and
autonegotiates for speed (10 or 100
Mbps.)
Forces 100 Mbps and half duplex.
Forces 10 Mbps and half duplex.
Release 5.3.x
673