Show Controllers Backplane Ethernet Clients - Cisco ASR 9000 Series Command Reference Manual

show controllers backplane ethernet clients

show controllers backplane ethernet clients
To display information about local client applications, use the show controllers backplane ethernet clients
command in EXEC mode.
show controllers backplane ethernet clients {client-id statistics| all}
Syntax Description
client-id statistics
all
Command Modes
EXEC
Command History
Release
Release 3.7.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Examples The following example shows the output from the show controllers backplane ethernet clients command,
which displays a list of client statistics for client ID 1:
RP/0/RSP0/CPU0:router# show controllers backplane ethernet
Client QNET, ES Client Id 1, PID 20498 running on FastEthernet0_33_1
Table 30: show controllers backplane ethernet clients Field Descriptions
Field
Client
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
536
490915 packets input, 41918238 bytes
490912 packets delivered,41918120 bytes
0 packets discarded (0 bytes) in garbage collection
0 (0 bytes) unicast packets filtered
0 (0 bytes) multicast packets filtered
0 (0 bytes) buffer mgmt policy discards
555660 packets output, 134265364 bytes, 0 could not be transmitted
Internal Ethernet Control Network Commands on the Cisco ASR 9000 Series Router
Displays a list of client statistics for the specified client ID. Range is from
1 to 22.
Displays a list of all client applications and their IDs.
Modification
This command was introduced.
Description
Client application name and ID, followed by
backplane client application statistics.
clients 1 statistics