Show Ethernet Lmi Interfaces - Cisco ASR 9000 Series Command Reference Manual

Ethernet OAM Commands on the Cisco ASR 9000 Series Router

show ethernet lmi interfaces

To display Ethernet Local Management Interface (E-LMI) information for an interface, including protocol
status and error and event statistics, use the show ethernet lmi interfaces command in EXEC configuration
mode.
show ethernet lmi interfaces [type interface-path-id ][brief | detail]
show ethernet lmi interfaces [brief | detail][location location]
Syntax Description
brief
detail
type
interface-path-id
location location
Command Default
The output displays the configured and operational state of E-LMI on the interface, with counts for reliability
and protocol errors and elapsed time since various events have occurred since the protocol was enabled on
the interface or counters were cleared.
Command Modes
EXEC (#)
Command History
Release
Release 4.1.0
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
(Optional) Displays summary information about the
E-LMI protocol status, number of EVCs and errors,
and CE-VLAN/EVC map type.
(Optional) Displays the configured and operational
state of E-LMI on the interface, with counts for
reliability and protocol errors and elapsed time since
various events have occurred, including details about
subinterfaces and EVC status.
(Optional) Interface type. For more information, use
the question mark (?) online help function.
Physical interface or virtual interface.
Note Use the show interfaces command to see a
list of all interfaces currently configured on
the router.
For more information about the syntax for the router,
use the question mark (?) online help function.
(Optional) Displays E-LMI information for the
designated node. The location argument is entered in
the rack/slot/module notation.
The location cannot be specified when you
Note
specify an interface type.
Modification
This command was introduced.

show ethernet lmi interfaces

Release 5.3.x
355