Cisco Asr 9000 Series Aggregation Services Router Interface And Hardware Component Command Reference - Cisco ASR 9000 Series Command Reference Manual

show ethernet cfm peer meps
Command Modes
EXEC (#)
Command History
Release
Release 3.7.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
If a Local MEP is receiving Wrong Level CCMs, and if the Remote MEP has its CCM processing offloaded,
Note
then the last CCM cannot be displayed.
Task ID
Task ID
ethernet-services
Examples The following example shows sample output of MEPs detected by a local MEP:
RP/0/RSP0/CPU0:router# show ethernet cfm peer meps
Flags:
> - Ok
R - Remote Defect received
L - Loop (our MAC received)
C - Config (our ID received)
X - Cross-connect (wrong MAID)
* - Multiple errors received
Domain dom3 (level 5), Service ser3
Down MEP on GigabitEthernet0/0/0/0 MEP-ID 1
================================================================================
St
-- ----- -------------- ------- ----------- --------- ------ ----- -----
V
Domain dom4 (level 2), Service ser4
Down MEP on GigabitEthernet0/0/0/0 MEP-ID 1
================================================================================
St
-- ----- -------------- ------- ----------- --------- ------ ----- -----
>
>
Domain dom5 (level 2), Service dom5

Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,

Release 5.3.x
340
ID MAC Address Port
10 0001.0203.0403 Up
ID MAC Address Port
20 0001.0203.0402 Up
21 0001.0203.0403 Up
Ethernet OAM Commands on the Cisco ASR 9000 Series Router
Modification
This command was introduced.
Operations
read
I - Wrong interval
V - Wrong level
T - Timed out
M - Missing (cross-check)
U - Unexpected (cross-check)
Up/Downtime CcmRcvd SeqErr
00:01:35 2
Up/Downtime CcmRcvd SeqErr
00:00:03 4
00:00:04 3
RDI Error
0 0 2
RDI Error
1 0 0
0 0 0